TomTom GPS

                              Trick to increase the internal memory of TomTom with 2 gb to 4 gb


Installing an slot SD-Card

On some versions of the TomTom ONE V3, it is possible to weld a SD-Card socket on the motherboard TomTom. Up to 2 GB are possible. 
You should only do this if: 
        . Your warranty is exceeded or if you don't care.
         . You really need more memory (for maps, mp3 music etc. ..)
         . you have the tools to welding and some experience in soldering very small and delicate things.

1. Perform a full backup of the contents Tomtom                       

 Do it with TomTom HOME, but also copy really all the TomTom internal memory on your hard disk

2. Open the Tomtom

      You will find the situation as depicted in picture here:

      Before welding: disconnect the battery.

3. Solder the SD card adapter

    Sd Card Interface only necessary images. The images below are correct : 

      Some improvements:
             
           . If you use a 2GB SD card more, install Bootloader 5.5022 or newer.
                . It works best with a micro SD card. So, can save space and install a new memory in the case of                    the TomTom ONE. MicroSD adapter used to support well insulated and narrow. Tested                             SanDisk microSD / TransFlash 2.0GB.

  4. Preparing SD card

      . Copy the entire contents, which you saved in 1. The SD card using a card reader.
      . Insert the Micro - SD card in the Tomtom  .
         . Power amd TomTom system should boot normally .


  .  Now you can copy more music or videos on the TomTom. Another advantage is            the following: If the sdcard is broken, you can just replace them with new very                cheap (I have not tried SD cards over 2GB it may not work .. Check!) 





. 

best gps, card, Gps Systems, install, latest, maps, mémory, navigation, pictures, sat nav, satellite, software, system, tom, tomtom, tomtom go, tomtom truck gps, tomtom XI, tricks, update tomtom gps